New Paste

 

Recent Pastes

Administrate




Pastebin on p.luis.im

PasteID: 90t
Pasted by Anonymous, 2019-05-27 21:28:13 GMT
Expires Never
Paste size 9.13 Kb
Tools Raw   Download
 
  1. [root@esxi-host:/opt] esxcli ssacli cmd -q "controller all show config detail"  
  2.   
  3. Smart Array B120i SATA RAID in Slot 0 (Embedded)  
  4.    Bus Interface: PCI  
  5.    Slot: 0  
  6.    Controller Status: OK  
  7.    Hardware Revision: C  
  8.    RAID Stack Version: 5.00-0  
  9.    HBA Firmware Version:   
  10.    HBA Mode Option ROM Version:   
  11.    Option ROM Version:3.54-0  
  12.    Rebuild Priority: Medium  
  13.    Surface Scan Delay: 3 secs  
  14.    Surface Scan Mode: Idle  
  15.    Parallel Surface Scan Supported: No  
  16.    Monitor and Performance Delay: 60  min  
  17.    Elevator Sort: Enabled  
  18.    Wait for Cache Room: Disabled  
  19.    Surface Analysis Inconsistency Notification: Disabled  
  20.    Post Prompt Timeout: 15 secs  
  21.    Cache Board Present: False  
  22.    Drive Write Cache: Disabled  
  23.    Total Cache Size: 0.0  
  24.    SATA NCQ Supported: True  
  25.    Spare Activation Mode: Activate on physical drive failure (default)  
  26.    Number of Ports: 6 Internal only  
  27.    Encryption: Not Set  
  28.    Driver Name: HP HPVSA  
  29.    Driver Version: 5.5.0.100-1OEM  
  30.    PCI Address (Domain:Bus:Device.Function): 0000:00:1F.2  
  31.    Port Max Phy Rate Limiting Supported: False  
  32.    Host Serial Number: SGH338470V  
  33.    Sanitize Erase Supported: False  
  34.    Primary Boot Volume: None  
  35.    Secondary Boot Volume: None  
  36.   
  37.   
  38.    Port Name: 1I  
  39.          Port ID: 0  
  40.          Port Connection Number: 0  
  41.          SAS Address: 0000000000000000  
  42.          Port Location: Internal  
  43.   
  44.    Port Name: 2I  
  45.          Port ID: 1  
  46.          Port Connection Number: 1  
  47.          SAS Address: 0000000000000001  
  48.          Port Location: Internal  
  49.   
  50.    Port Name: 3I  
  51.          Port ID: 2  
  52.          Port Connection Number: 2  
  53.          SAS Address: 0000000000000002  
  54.          Port Location: Internal  
  55.   
  56.    Port Name: 4I  
  57.          Port ID: 3  
  58.          Port Connection Number: 3  
  59.          SAS Address: 0000000000000003  
  60.          Port Location: Internal  
  61.   
  62.    Port Name: 5I  
  63.          Port ID: 4  
  64.          Port Connection Number: 4  
  65.          SAS Address: 0000000000000004  
  66.          Port Location: Internal  
  67.   
  68.    Port Name: 6I  
  69.          Port ID: 5  
  70.          Port Connection Number: 5  
  71.          SAS Address: 0000000000000005  
  72.          Port Location: Internal  
  73.   
  74.    Array: A  
  75.       Interface Type: SATA  
  76.       Unused Space: 0 MB (0.00%)  
  77.       Used Space: 2.73 TB (100.00%)  
  78.       Status: OK  
  79.       Array Type: Data   
  80.       Smart Path: disable  
  81.   
  82.   
  83.       Logical Drive: 1  
  84.          Size: 2.73 TB  
  85.          Fault Tolerance: 0  
  86.          Heads: 255  
  87.          Sectors Per Track: 32  
  88.          Cylinders: 65535  
  89.          Strip Size: 256 KB  
  90.          Full Stripe Size: 256 KB  
  91.          Status: OK  
  92.          Caching:  Enabled  
  93.          Unique Identifier: 600508B1001C1BF2B5F03F869A769319  
  94.          Logical Drive Label: A46E46AA3DC0  
  95.          Drive Type: Data  
  96.          LD Acceleration Method: Controller Cache  
  97.   
  98.   
  99.       physicaldrive 3I:0:3  
  100.          Port: 3I  
  101.          Box: 0  
  102.          Bay: 3  
  103.          Status: OK  
  104.          Drive Type: Data Drive  
  105.          Interface Type: SATA  
  106.          Size: 3 TB  
  107.          Drive exposed to OS: False  
  108.          Logical/Physical Block Size: 512/4096  
  109.          Rotational Speed: 7200  
  110.          Firmware Revision: MX6OABB0  
  111.          Serial Number: 938448EKS  
  112.          Model: ATA     TOSHIBA DT01ACA3  
  113.          SATA NCQ Capable: True  
  114.          SATA NCQ Enabled: True  
  115.          Current Temperature (C): 37  
  116.          Maximum Temperature (C): 45  
  117.          PHY Count: 1  
  118.          PHY Transfer Rate: 3.0Gbps  
  119.          Drive Authentication Status: Not Applicable  
  120.          Sanitize Erase Supported: False  
  121.          Shingled Magnetic Recording Support: None  
  122.   
  123.   
  124.   
  125.    Array: B  
  126.       Interface Type: SATA  
  127.       Unused Space: 0 MB (0.00%)  
  128.       Used Space: 698.61 GB (100.00%)  
  129.       Status: OK  
  130.       Array Type: Data   
  131.       Smart Path: disable  
  132.   
  133.   
  134.       Logical Drive: 2  
  135.          Size: 698.61 GB  
  136.          Fault Tolerance: 0  
  137.          Heads: 255  
  138.          Sectors Per Track: 32  
  139.          Cylinders: 65535  
  140.          Strip Size: 256 KB  
  141.          Full Stripe Size: 256 KB  
  142.          Status: OK  
  143.          Caching:  Enabled  
  144.          Unique Identifier: 600508B1001C59B3DB470D363E4BB197  
  145.          Logical Drive Label: A4718EFC0040  
  146.          Drive Type: Data  
  147.          LD Acceleration Method: Controller Cache  
  148.   
  149.   
  150.       physicaldrive 4I:0:4  
  151.          Port: 4I  
  152.          Box: 0  
  153.          Bay: 4  
  154.          Status: OK  
  155.          Drive Type: Data Drive  
  156.          Interface Type: SATA  
  157.          Size: 750 GB  
  158.          Drive exposed to OS: False  
  159.          Logical/Physical Block Size: 512/512  
  160.          Firmware Revision: 1AA01113  
  161.          Serial Number: S13UJDWQ733060  
  162.          Model: ATA     SAMSUNG HD753LJ  
  163.          SATA NCQ Capable: True  
  164.          SATA NCQ Enabled: True  
  165.          Current Temperature (C): 33  
  166.          Maximum Temperature (C): 63  
  167.          PHY Count: 1  
  168.          PHY Transfer Rate: 3.0Gbps  
  169.          Drive Authentication Status: Not Applicable  
  170.          Sanitize Erase Supported: False  
  171.          Shingled Magnetic Recording Support: None  
  172.   
  173.   
  174.   
  175.    Array: C  
  176.       Interface Type: Solid State SATA  
  177.       Unused Space: 0 MB (0.00%)  
  178.       Used Space: 465.73 GB (100.00%)  
  179.       Status: OK  
  180.       Array Type: Data   
  181.       Smart Path: disable  
  182.   
  183.   
  184.       Logical Drive: 3  
  185.          Size: 465.73 GB  
  186.          Fault Tolerance: 0  
  187.          Heads: 255  
  188.          Sectors Per Track: 32  
  189.          Cylinders: 65535  
  190.          Strip Size: 256 KB  
  191.          Full Stripe Size: 256 KB  
  192.          Status: OK  
  193.          Caching:  Enabled  
  194.          Unique Identifier: 600508B1001C91AABF02808DB6EE9823  
  195.          Logical Drive Label: ACF65231D390  
  196.          Drive Type: Data  
  197.          LD Acceleration Method: Controller Cache  
  198.   
  199.   
  200.       physicaldrive 2I:0:2  
  201.          Port: 2I  
  202.          Box: 0  
  203.          Bay: 2  
  204.          Status: OK  
  205.          Drive Type: Data Drive  
  206.          Interface Type: Solid State SATA  
  207.          Size: 500 GB  
  208.          Drive exposed to OS: False  
  209.          Logical/Physical Block Size: 512/512  
  210.          Firmware Revision: RVT01B6Q  
  211.          Serial Number: S3YANB0K501690X  
  212.          Model: ATA     Samsung SSD 860  
  213.          SATA NCQ Capable: True  
  214.          SATA NCQ Enabled: True  
  215.          Current Temperature (C): 32  
  216.          Maximum Temperature (C): 49  
  217.          SSD Smart Trip Wearout: Not Supported  
  218.          PHY Count: 1  
  219.          PHY Transfer Rate: 6.0Gbps  
  220.          Drive Authentication Status: Not Applicable  
  221.          Sanitize Erase Supported: False  
  222.          Shingled Magnetic Recording Support: None  
  223.   
  224.   
  225.   
  226.    Array: D  
  227.       Interface Type: Solid State SATA  
  228.       Unused Space: 2 MB (0.00%)  
  229.       Used Space: 232.85 GB (100.00%)  
  230.       Status: OK  
  231.       Array Type: Data   
  232.       Smart Path: disable  
  233.   
  234.   
  235.       Logical Drive: 4  
  236.          Size: 232.85 GB  
  237.          Fault Tolerance: 0  
  238.          Heads: 255  
  239.          Sectors Per Track: 32  
  240.          Cylinders: 59844  
  241.          Strip Size: 256 KB  
  242.          Full Stripe Size: 256 KB  
  243.          Status: OK  
  244.          Caching:  Enabled  
  245.          Unique Identifier: 600508B1001CD221DEF332C55D3D6C78  
  246.          Logical Drive Label: A93B4294AB80  
  247.          Drive Type: Data  
  248.          LD Acceleration Method: Controller Cache  
  249.   
  250.   
  251.       physicaldrive 5I:0:5  
  252.          Port: 5I  
  253.          Box: 0  
  254.          Bay: 5  
  255.          Status: OK  
  256.          Drive Type: Data Drive  
  257.          Interface Type: Solid State SATA  
  258.          Size: 250 GB  
  259.          Drive exposed to OS: False  
  260.          Logical/Physical Block Size: 512/512  
  261.          Firmware Revision: EMT02B6Q  
  262.          Serial Number: S2R4NB0H916451H  
  263.          Model: ATA     Samsung SSD 850  
  264.          SATA NCQ Capable: True  
  265.          SATA NCQ Enabled: True  
  266.          Current Temperature (C): 31  
  267.          Maximum Temperature (C): 48  
  268.          SSD Smart Trip Wearout: Not Supported  
  269.          PHY Count: 1  
  270.          PHY Transfer Rate: 3.0Gbps  
  271.          Drive Authentication Status: Not Applicable  
  272.          Sanitize Erase Supported: False  
  273.          Shingled Magnetic Recording Support: None  
  274.   
  275.   
  276.   
  277.    Array: E  
  278.       Interface Type: Solid State SATA  
  279.       Unused Space: 0 MB (0.00%)  
  280.       Used Space: 465.73 GB (100.00%)  
  281.       Status: OK  
  282.       Array Type: Data   
  283.       Smart Path: disable  
  284.   
  285.   
  286.       Logical Drive: 5  
  287.          Size: 465.73 GB  
  288.          Fault Tolerance: 0  
  289.          Heads: 255  
  290.          Sectors Per Track: 32  
  291.          Cylinders: 65535  
  292.          Strip Size: 256 KB  
  293.          Full Stripe Size: 256 KB  
  294.          Status: OK  
  295.          Caching:  Enabled  
  296.          Unique Identifier: 600508B1001C5BFBD1C7CF4CDDB9D4F7  
  297.          Logical Drive Label: ACF26B45B350  
  298.          Drive Type: Data  
  299.          LD Acceleration Method: Controller Cache  
  300.   
  301.   
  302.       physicaldrive 1I:0:1  
  303.          Port: 1I  
  304.          Box: 0  
  305.          Bay: 1  
  306.          Status: OK  
  307.          Drive Type: Data Drive  
  308.          Interface Type: Solid State SATA  
  309.          Size: 500 GB  
  310.          Drive exposed to OS: False  
  311.          Logical/Physical Block Size: 512/512  
  312.          Firmware Revision: RVT01B6Q  
  313.          Serial Number: S3YANB0K501688K  
  314.          Model: ATA     Samsung SSD 860  
  315.          SATA NCQ Capable: True  
  316.          SATA NCQ Enabled: True  
  317.          Current Temperature (C): 36  
  318.          Maximum Temperature (C): 47  
  319.          SSD Smart Trip Wearout: Not Supported  
  320.          PHY Count: 1  
  321.          PHY Transfer Rate: 6.0Gbps  
  322.          Drive Authentication Status: Not Applicable  
  323.          Sanitize Erase Supported: False  
  324.          Shingled Magnetic Recording Support: None  
  325.   
  326.   
  327.   
  328.  
 
 
 
 
Written by Xan Manning, 2010.